Search found 13 matches
- Thu Aug 11, 2005 8:44 am
- Forum: Transmission/Clutches/Brakes
- Topic: Power button and revs
- Replies: 5
- Views: 845
I think that technically you are correct with (a variation of ) 2 but 1 may be the better option because.. in our cars we are mostly at 90-100% torque whereever you are in the rev range so it's not really a big thing. Power does increase dramatically with revs (almost linearly from 2500 (~40%) to pe...
- Tue Aug 09, 2005 8:24 am
- Forum: Transmission/Clutches/Brakes
- Topic: Power button and revs
- Replies: 5
- Views: 845
- Tue Aug 09, 2005 8:03 am
- Forum: Transmission/Clutches/Brakes
- Topic: Power button and revs
- Replies: 5
- Views: 845
Many thanks. For the MT the service book (Nubira 1.6 and 2.0) says 'if possible, drive in each gear in the low engine speed range (between approx 2000 and 3000 rpm) and maintain an even vehicle speed'. This equates to the 'economy' mode. Max torque in the 1.6 (same engine as Lanos I think) is at 580...
- Wed Aug 03, 2005 9:14 am
- Forum: Transmission/Clutches/Brakes
- Topic: Power button and revs
- Replies: 5
- Views: 845
Power button and revs
I have a 2L CDX nubira (manual shift) bit note from my owners manual that the automatic transmission version has a power/economy button which alters (sets) the revs at which the automatic changes its gear. I would be interested to know at what revs an automatic transimission changes gear in both pow...
- Sun May 22, 2005 4:07 pm
- Forum: Engine/Intake/Exhaust
- Topic: Engine Blown (THE NIGHTMARE!)
- Replies: 30
- Views: 3602
- Tue May 17, 2005 10:07 am
- Forum: Transmission/Clutches/Brakes
- Topic: buzzing/noisy gear shifter
- Replies: 2
- Views: 500
buzzing/noisy gear shifter
I drive a nubira CDX with 50k on the clock. At some revs eg ~2k my gear lever seems to vibrate and buzz making a loud noise - at first I thought the noise was from the exhaust. The noise is particularly annoying in gears 1,3, and 5 and not noticeable in gears 2 and 4. If I move the gear shifter slig...
- Wed Mar 02, 2005 10:20 am
- Forum: Engine/Intake/Exhaust
- Topic: 'normal' engine coolant temperatures
- Replies: 3
- Views: 505
'normal' engine coolant temperatures
The guage on my nubira does not give any numerical indication of temperature, and I can only assume that the middle of the dial is 'normal' and 90 oC. If that is the case then my car generally 'runs cold' since the needle generally sits half-way between this mark and the one immediately to its left....
- Tue Mar 01, 2005 1:26 pm
- Forum: Engine/Intake/Exhaust
- Topic: Not enough temperature
- Replies: 4
- Views: 642
- Wed Feb 09, 2005 3:35 pm
- Forum: General Off-Topic
- Topic: Oil filters
- Replies: 6
- Views: 897
Many thanks - i didn't think of looking there! I went into the back of something with a nubira 1.6 a month ago and just got the 2.0 as a replacement car. The oil filter on the 1.6 is at the front, in the middle. The 2.0 is much more zippy than the 1.6 which always seemed underpowered! My leak is in ...
- Wed Feb 09, 2005 2:09 pm
- Forum: General Off-Topic
- Topic: Oil filters
- Replies: 6
- Views: 897
- Fri Dec 10, 2004 9:04 am
- Forum: Detailing/Exterior/Suspension
- Topic: squeaky suspension
- Replies: 2
- Views: 620
squeaky suspension
Hi I have a nubira 1.6 SE (1998) which has noisy suspension. When I go over speed bumps I get a squaeky noise at the front and back - it used to be only at the front, so things are getting worse. Are my shocks likely to be shot or will some grease fix it - if so where abouts should I apply it? The c...
- Tue Oct 12, 2004 12:56 pm
- Forum: Engine/Intake/Exhaust
- Topic: Spark Plug Wire Set
- Replies: 22
- Views: 3781
- Thu Sep 30, 2004 12:59 pm
- Forum: Engine/Intake/Exhaust
- Topic: Drilled air box
- Replies: 3
- Views: 535
Drilled air box
I have a nubira estate 1.6SE and am trying to optimise performance (power). I changed to a K&N panel filter and Bosch super 4 spark plugs but with no real improvements. I am wondering if drilling my air box will have any effect. Has any one tried? I have not removed the air resonator. Also I am usin...