Clearance Clearance Clearance

[gse_turbo]

I have quite a bit of inventory that I'd like to clear out before bringing in new stuff or developing new things.

NEW
- 4 Main support girdles for 2.0 blocks $70
- 4 Motor mount brackets for 2.0 swap into a Lanos or Lemans $65
- 5 ARP head stud kits for the 2.0 16v $85 (IPP has them for $115 + Shipping)
- 1 ARP Hi-Perf Series rod bolts for the 2.0 and 2.2 $50 (IPP has them for $65 + Shipping)
- 1 ARP 2000 Series rod bolts for the 2.0 and 2.2 $80 (IPP doesn't have them available)
- 9 rubber oil pan pan gaskets for 2.0 8v and 16v $20
- TONS of Clevite rod and main bearings for 2.0 and 2.2 motors (Calico coatings are available at additional cost) inquire about prices
- 1 (set)Wiseco Pistons, 87mm 9.0:1 (turbo) w/dry-lube skirt coatings

USED
- 1 Complete Greddy E-Manage blue $150
- 1 (set) T22SED con-rods, de-cast, floating pin modified and balanced w/ARP 2000 series bolts $150
- 1 T22SED crank, lightened, knife-edged, balanced, cryo treated $300 OBO
- 2 (set) C20LET con-rods, de-cast w/ARP 2000 series bolts $175 (each set)

[benzino]

what engine are you talking about for the 2,0 swap? T20SED?

and international postage?

[gse_turbo]

what engine are you talking about for the 2,0 swap? T20SED?

and international postage?

you can use any of the 2.0/2.2 motors, the C20GET and the C20LET are the most common but yes the T20SED as well.

as for the internals, I'll update the first post

[gse_turbo]

I have quite a bit of inventory that I'd like to clear out before bringing in new stuff or developing new things.

NEW
- 4 Main support girdles for 2.0 blocks $70
- 4 Motor mount brackets for 2.0 swap into a Lanos or Lemans $65
- 5 ARP head stud kits for the 2.0 16v $85 (IPP has them for $115 + Shipping)
- 1 ARP Hi-Perf Series rod bolts for the 2.0 and 2.2 $50 (IPP has them for $65 + Shipping)
- 1 ARP 2000 Series rod bolts for the 2.0 and 2.2 $80 (IPP doesn't have them available)
- 9 rubber oil pan pan gaskets for 2.0 8v and 16v $20
- TONS of Clevite rod and main bearings for 2.0 and 2.2 motors (Calico coatings are available at additional cost) inquire about prices
- 1 (set)Wiseco Pistons, 87mm 9.0:1 (turbo) w/dry-lube skirt coatings
- 2 T20SED/T22SED, Z20LET/X20XEV Aluminum Under Drive pulleys $95 JUST ADDED

USED
- 1 Complete Greddy E-Manage blue $150
- 1 (set) T22SED con-rods, de-cast, floating pin modified and balanced w/ARP 2000 series bolts $150
- 1 T22SED crank, lightened, knife-edged, balanced, cryo treated $300 OBO
- 2 (set) C20LET con-rods, de-cast w/ARP 2000 series bolts $175 (each set)

[exist3nce]

Do you have any pictures of the main support girdle? I might be interested in one of those, but I can't even remember how it looks.

[gse_turbo]

Our Main Cap Support is available for the the 1.8/2.0/2.2 "Bid Block" motors.

The price listed on daftart.com, $95.00 for support alone, will have to be updated to include the price of the hardware, $13.00 for 10.9 grade bolts and washers.

Tell Me What You Think!

[benzino]

hey I was just wondering if the motor mounts and emanage were still for sale?

[gse_turbo]

yes and yes, PM sent