Big Jeff daewoo Lanos update

Big Jeff · Post by **Big Jeff** » Thu Jun 26, 2008 5:43 pm

here info about my car
Updates in blue
basic info:
Make:GM Daewoo
Model:Lanos
Trim:SX
Engine:1.6 16v DOHC Engine (i have had 120mph+ out of it don't understand how myself?)
Colour:Azurite Blue(last owner did the paint work was old

)

Sound
Ripspeed 720 dvd head unit(4x40W)
Stock front speakers
6x9 rear speakers (4way, 350w)
1ooW amp with sub

Engine
uni air induction cone
removed intake resonator
NGK V-groove sparkplugs
Mod Cat(Reduce the shit in side)

Other
OMP Strutbacer
HID 6000k single beam
17" oz racing rims

Big Jeff · Post by **Big Jeff** » Thu Jun 26, 2008 8:18 pm

buddha102 · Post by **buddha102** » Thu Jun 26, 2008 10:35 pm

post some pics of the engine

Rodd1s · Post by **Rodd1s** » Fri Jun 27, 2008 12:09 am

the 1.6 lanos should easily reach in excess of 120mph... the 1.3 gets to just under 115mph.

buddha102 · Post by **buddha102** » Fri Jun 27, 2008 1:52 am

Rodd1s wrote:the 1.6 lanos should easily reach in excess of 120mph... the 1.3 gets to just under 115mph.

lol there is even 1.3? never knew that

btw, the manual says that it can get 105mph idk r u wrong, or manual

Pir0 · Post by **Pir0** » Fri Jun 27, 2008 2:02 am

Top speeds are never correct in those manuals.

And there was a 1.3 in the UK

buddha102 · Post by **buddha102** » Fri Jun 27, 2008 2:42 am

cool thx for the info

Rodd1s · Post by **Rodd1s** » Fri Jun 27, 2008 7:52 am

Pir0 wrote:Top speeds are never correct in those manuals.

And there was a 1.3 in the UK

1.3 or 1.4... its all the same 1349cc engine, for which the stated top speed is 103mph, and obviously it can go plenty more than that with a little de-restriction

Big Jeff · Post by **Big Jeff** » Fri Jun 27, 2008 8:19 am

here a pic of my engine bay

and yes i know i got no coolant think water pumps gone (seal.hose or pump itself?), need to clean air filter

MMamdouh · Post by **MMamdouh** » Fri Jun 27, 2008 5:44 pm

one of the lucky guys with metal T-state housing.

MMamdouh

Big Jeff · Post by **Big Jeff** » Fri Jun 27, 2008 5:57 pm

MMamdouh wrote:one of the lucky guys with metal T-state housing.

MMamdouh

why that??

Pir0 · Post by **Pir0** » Fri Jun 27, 2008 6:20 pm

The metal Thermostat housing, on the left side of the head, with the hose going to the top of the rad.

A lot of lanoses came with a plastic one which breaks easier afaik

Big Jeff · Post by **Big Jeff** » Fri Jun 27, 2008 6:28 pm

well i'm a lucky one,

Could anyone tell me what i would need to turbo my car, and what size would me best and how much it could cost me

MMamdouh · Post by **MMamdouh** » Fri Jun 27, 2008 11:56 pm

check the performance section and the How to section as well

MMamdouh

Big Jeff · Post by **Big Jeff** » Wed Jul 02, 2008 7:36 pm

Just finish doing my white dials and change the lights to LEDs
will post pic later

the LEds i used were:
(501) wide angle UV Led and (286) 120' Wide Angle 5mm Blue