Turbo 2.0 website

Erich · Post by **Erich** » Mon Feb 07, 2005 7:04 am

Darmuck's C20GET website is down, anyone know whats up?

GsiTurbo · Post by **GsiTurbo** » Mon Feb 07, 2005 7:06 am

Umm, no, but if you need replacement, or high-performance parts for this engine, please contact us via email.

Erich · Post by **Erich** » Mon Feb 07, 2005 7:30 am

Its running a bit slow. I have not been around since December since i was busy.

I saw your gasket set.

What i need is a replacement turbo manifold that will allow for external gate and a different turbo, such as a junkyard Saab T3 or.

I have a new C20GET block, head already put together, harness, trans, etc and getting ready for install(still need to get a chassis)

I got into an argument today on a Quad 4 forum that erupted from a guy finding a clean 1988 Turbo Grand Am for sale and some people calling the C20GET the worst engine ever made and some crap.

I would like the manifold though, i came across some that were a bit out of price for this particular project. The goal is to use this engine and bolt on parts on a budget and get it to GM Small car bash this summer.

You may find me linking around, and Stephan has also been a good help too.

GsiTurbo · Post by **GsiTurbo** » Mon Feb 07, 2005 7:38 am

We are hoping for the cast T3-flange manifold with the external wastegate provision, to be available in abouts a month time or so. The estimated price, at this moment, is in the range of US $350 +/- 15% shipped.

At this point, we can also get the cold-forged valve followers for the C20GET engine.

Could you post the link to the Quad4 forum? I would not mind reading that particular post

Email us for more info.

Erich · Post by **Erich** » Mon Feb 07, 2005 8:08 am

Is it like Stephan's?

I would probably buy it.

The alternative was to use a 1.8 Nissan manifold and cut and weld the flanges.

I am using a Fiero 54mm throttle, probably stock injectors(though i have DSM's from a 5spd 4G63 as possible)

Do you have a different memcal? I know Jeff has one.

This is a link from Quad 4 Forums where I got into some muck tonight. Feel free to share info with them.

http://www.quad4forums.com/forums/showt ... eadid=2851

Erich · Post by **Erich** » Mon Feb 07, 2005 8:10 am

I also have a nice supply of late model Daewoo's that come in to my yard. I may snatch up another LT3 and hybrid the Daewoo's head.

My goal is to geto the LT3 swap accepted by GM small car world as a fair nice alternative to Quad 4, and 60 degree's.

Post by **PrecisionBoost** » Tue Feb 08, 2005 2:38 am

I don't seem to have a problem with the LT3 site.... loads like normal on my system.

AcingTeam · Post by **AcingTeam** » Tue Feb 08, 2005 2:52 am

I don't like the way the bashed our Daewoos on that forum...