Whats up with this "*** INTIMIDATOR TURBO ***"

daftmajin · Post by **daftmajin** » Mon Jun 13, 2005 7:31 pm

http://www.intimidator.co.kr/bbs/zboard ... asc&no=127

pehN · Post by **pehN** » Mon Jun 13, 2005 8:11 pm

Don't you think 1 Thread is enough?

daftmajin · Post by **daftmajin** » Mon Jun 13, 2005 9:47 pm

pehN wrote:Don't you think 1 Thread is enough?

I think this is the only one Deathwind reads.

kinkyllama · Post by **kinkyllama** » Mon Jun 13, 2005 9:53 pm

What about the third thread then?

Deathwind · Post by **Deathwind** » Tue Jun 14, 2005 1:43 am

Oops I forgot to upload this turbo package

This is a turbo package for 1.6L, 1.8L, 2.0L, 2.2L.

============================
Turbine: Garett 025 or 028
---------------------------------------------------------------
Intercooler: Made by Power Core
---------------------------------------------------------------
Head Gasket: Made by Intimidator for turbocharger
--------------------------------------------------------------
Injector: 600cc
--------------------------------------------------------------
Headers: Made by Maintech
-------------------------------------------------------------
Down Pipe: Made by Maintech
-------------------------------------------------------------
First Pipe: Made by Maintech
-------------------------------------------------------------
Blow off valve: Made by Turbotech
-------------------------------------------------------------
Intake: Made by Intimidator for turbo
-------------------------------------------------------------
MAP sensor: 2.5bar
-------------------------------------------------------------
ECM: Mapped with SAM 2000
-------------------------------------------------------------
Gauge: Boost Gauge(Sard)
-------------------------------------------------------------
Oilcooler: Made by Intimidator
-------------------------------------------------------------

This package is 4500USD. Including installing fee.

As soon as we get the first car on dyno. I'll upload the pictures.

lanos2001 · Post by **lanos2001** » Tue Jun 14, 2005 1:50 am

how much just for the header and the ECM separately?

*edit*
if you do sell separately how much for every item separately?

nick

Brian5475E · Post by **Brian5475E** » Tue Jun 14, 2005 2:10 am

Not worth it in the U.S. you can build your own setup for less than a 1000. Looks like a custom manifold. How much for the manifold, or can you get just the flange? Also how can it be for the 1.6, 1.8, 2.0 and 2.2/ The 1.6 is different than those other motors.

AcingTeam · Post by **AcingTeam** » Tue Jun 14, 2005 4:58 am

Brian5475E wrote:Not worth it in the U.S. you can build your own setup for less than a 1000. Looks like a custom manifold. How much for the manifold, or can you get just the flange? Also how can it be for the 1.6, 1.8, 2.0 and 2.2/ The 1.6 is different than those other motors.

I'm sure they have different kits worked out for each engine.

Deathwind · Post by **Deathwind** » Tue Jun 14, 2005 6:49 am

ECM can not be sold seperately.
Becuase it is road mapping. So it has different settings for each car.

Also of course every items are different for each engines.

And headers I'm not sure. I have to ask.

And Brian5475E. How much are turbines that are listed in USA(Because I don't know the prices there)?

daewooluvr · Post by **daewooluvr** » Tue Jun 14, 2005 1:22 pm

This package is 4500USD. Including installing fee.

hmmm how do you plan to install it? There's a lil puddle between us.

lanos2001 · Post by **lanos2001** » Tue Jun 14, 2005 1:26 pm

i think what he meant was that installing would cost more money to have someone put it on not from the necessarily.

nick

Tyrant · Post by **Tyrant** » Tue Jun 21, 2005 11:55 am

deathwind, will the 2.0L package fit the daewoo magnus with no problems?

Deathwind · Post by **Deathwind** » Tue Jun 21, 2005 1:03 pm

Yeah I think so.
But I recommend buying the packages there. Or from USA. Because except for the custom parts. Everything is from USA. So it's bit expensive.

But I don't how you are going to do modify ECM.

pehN · Post by **pehN** » Tue Jun 21, 2005 1:52 pm

Nothing for the 1.5?

Deathwind · Post by **Deathwind** » Thu Jun 23, 2005 12:37 pm

It can be installed for 1.5L engine too

The original daewootech forum

Whats up with this "* INTIMIDATOR TURBO *"

Whats up with this "* INTIMIDATOR TURBO *"

Intimidator

Intimidator

Intimidator

Intimidator