Where to download service manual for Daewoos?
Moderators: daewoomofo, Moderators Group
-
- moron
- Posts: 4493
- Joined: Wed Dec 08, 2004 5:18 am
- Location: Knoxville, Tennessee
- Contact:
Where to download service manual for Daewoos?
LANOS SERVICE MANUAL
http://storeandserve.com/download/39546 ... l.rar.html
***note: there are approx. 150 missing pages from the ENGINE CONTROLS section. these are the trouble shooting for things like, laggy engine, sputtering, etc. if you have a problem with the engine acting up, post and i will look up the solution in the paper manuals.
READ BELOW FOR THE MANUAL TRANSMISSION AND CLUTCH SECTIONS
FORENZA/RENO/LACETTI SERVICE MANUAL
http://storeandserve.com/download/40449 ... l.rar.html
merry christmas my fellow lanos owners
COMMING SOON: NUBIRA and NEXIA/RACER/CIELO
http://storeandserve.com/download/39546 ... l.rar.html
***note: there are approx. 150 missing pages from the ENGINE CONTROLS section. these are the trouble shooting for things like, laggy engine, sputtering, etc. if you have a problem with the engine acting up, post and i will look up the solution in the paper manuals.
READ BELOW FOR THE MANUAL TRANSMISSION AND CLUTCH SECTIONS
FORENZA/RENO/LACETTI SERVICE MANUAL
http://storeandserve.com/download/40449 ... l.rar.html
merry christmas my fellow lanos owners
COMMING SOON: NUBIRA and NEXIA/RACER/CIELO
Last edited by Audacity Racing on Sun Feb 05, 2006 4:31 pm, edited 3 times in total.
i used to think Santa doesn't exist... turns out it does and apparently he drives a Daewoo just like we do :lmao:
MMamdouh
MMamdouh
Driving is the utmost fun you can have with your pants on!
Check out my ride: http://www.cardomain.com/ride/567267
Check out my ride: http://www.cardomain.com/ride/567267
-
- moron
- Posts: 4493
- Joined: Wed Dec 08, 2004 5:18 am
- Location: Knoxville, Tennessee
- Contact:
-
- moron
- Posts: 4493
- Joined: Wed Dec 08, 2004 5:18 am
- Location: Knoxville, Tennessee
- Contact:
i sincerely appologize!!! i found them... the clutch and the manual tranny section... here they are...
http://www.daewootech.com/users/audacit ... bl3_5b.pdf <~ Manual Section
http://www.daewootech.com/users/audacit ... bl3_5c.pdf <~ Clutch Section
again, i am TERRIBLY sorry!!!
you can just add these directly into the file and they'll go where they are supposed to
http://www.daewootech.com/users/audacit ... bl3_5b.pdf <~ Manual Section
http://www.daewootech.com/users/audacit ... bl3_5c.pdf <~ Clutch Section
again, i am TERRIBLY sorry!!!
you can just add these directly into the file and they'll go where they are supposed to
RAR file?
I downloaded the manual but its in a RAR format and I couldn't get a tool to read the file that worked.
Does it exist in a diff format any where you know of?
Or do you now where I can download the software to read that format?
What I need is a diagram or pic of what the strut looks like apart, daily driver so I don't have the time to take the strut out of the car to take pics.
Does it exist in a diff format any where you know of?
Or do you now where I can download the software to read that format?
What I need is a diagram or pic of what the strut looks like apart, daily driver so I don't have the time to take the strut out of the car to take pics.
Last edited by dog on Mon Jan 02, 2006 3:42 pm, edited 1 time in total.
-
- moron
- Posts: 4493
- Joined: Wed Dec 08, 2004 5:18 am
- Location: Knoxville, Tennessee
- Contact:
merry christmas
http://www.rarlab.com/rar/wrar351.exe
the program is called winrar. it also functions as a zip file opener. rar files are basically the same thing a s a zip, with better compression.
http://www.rarlab.com/rar/wrar351.exe
the program is called winrar. it also functions as a zip file opener. rar files are basically the same thing a s a zip, with better compression.
Sweet.
By the way thanks for the posts you do. I am going to do the motor mounts with the window weld. Soon as I put the power in the engine jumps so bad it broke the flex pipe on the exhaust and bangs the intake off the hood when you start it.
here is a link to my ridehttp://www.suzuki-forums.com/2004-Suzuk ... -cid29.htm
Its not up to date because a smuck stole my camera.
By the way thanks for the posts you do. I am going to do the motor mounts with the window weld. Soon as I put the power in the engine jumps so bad it broke the flex pipe on the exhaust and bangs the intake off the hood when you start it.
here is a link to my ridehttp://www.suzuki-forums.com/2004-Suzuk ... -cid29.htm
Its not up to date because a smuck stole my camera.
if you did that then i suppose the current mounts are busted... better get new ones and treat them with silicon (window weld) and you will feel the difference.
MMamdouh
MMamdouh
Driving is the utmost fun you can have with your pants on!
Check out my ride: http://www.cardomain.com/ride/567267
Check out my ride: http://www.cardomain.com/ride/567267
I pulled the dog bone and those were ok but sadly I have to deal with some strut issues first.
I was coming around a curve and found a 6" dia dead tree across the highway the hit ruined a rim but at the time eveything with the suspension looked good but after a few high speed potholes and ripples in the asphalt the mount and bearing on that side are shot and the other side is showing some wear. My habit of treating an empty expressway as my own personal autobahn is catching up with me.
I was coming around a curve and found a 6" dia dead tree across the highway the hit ruined a rim but at the time eveything with the suspension looked good but after a few high speed potholes and ripples in the asphalt the mount and bearing on that side are shot and the other side is showing some wear. My habit of treating an empty expressway as my own personal autobahn is catching up with me.
do you have Winrar?
MMamdouh
MMamdouh
Driving is the utmost fun you can have with your pants on!
Check out my ride: http://www.cardomain.com/ride/567267
Check out my ride: http://www.cardomain.com/ride/567267
-
- Expert
- Posts: 3772
- Joined: Wed Oct 20, 2004 4:47 am
- Location: USA, Arizona
- Contact:
Re: COMPLETE MANUAL FOR LANOS AND RENO/FORENZA/LACETTI
Dang, they dont have the 2.0 in there.Audacityracing wrote:
FORENZA/RENO/LACETTI SERVICE MANUAL
http://storeandserve.com/download/40449 ... l.rar.html
www.KinkyMotorsports.com
04' Dropped Foreno
-Coil-overs, sway bars, 13" brakes, LSD, 235mm tires, the works
-Turbo in the works
01' Lanos Sport
-Undergoing 2.0 swap w/ lots of performance bits
http://www.cardomain.com/id/kinkyllama
04' Dropped Foreno
-Coil-overs, sway bars, 13" brakes, LSD, 235mm tires, the works
-Turbo in the works
01' Lanos Sport
-Undergoing 2.0 swap w/ lots of performance bits
http://www.cardomain.com/id/kinkyllama
Nexia Manual
Is there a nexia workshop manual available?