Page 1 of 1
Australian Nubira 2.0 EMC pinouts
Posted: Thu Jul 19, 2012 12:43 pm
by ls400x
PLeaseee point me towards a download for a 2000 ish Australian Nubira ECM pinouts and/or wiring diagram. There is one here on daewootech that I can find be it seems to be for a US model. Australian does not have a cam angle sensor and the pins are significantly different.
Re: Australian Nubira 2.0 EMC pinouts
Posted: Thu Jul 19, 2012 8:48 pm
by Puddle31
there are a couple of great people on here from Australia, I'm sure one of them will try to help you out.
Re: Australian Nubira 2.0 EMC pinouts
Posted: Fri Jul 20, 2012 3:03 am
by ls400x
I have worked out most of the pins for my AEM F/IC installation but determining which are power earth and which are signal earth have held me up.
Also, I have guessed the polarity of the crank angle sensor and have assumed it's a magnetic type. It would be great if someone could confirm.
Any info at all on these would be greatly apprecieated.
Re: Australian Nubira 2.0 EMC pinouts
Posted: Fri Jul 20, 2012 4:42 am
by benzino
can you PM me your email and I'll send you the PDF file
Re: Australian Nubira 2.0 EMC pinouts
Posted: Sun Jul 22, 2012 6:23 pm
by Puddle31
nice job Benzino!
Re: Australian Nubira 2.0 EMC pinouts
Posted: Tue Jul 24, 2012 5:47 am
by ls400x
Thanks benzino! Champion
Re: Australian Nubira 2.0 EMC pinouts
Posted: Tue Jul 24, 2012 11:58 am
by benzino
I just hope the documents I sent help