01 Lanos Auto to Stick Project

exiledlanos · Post by **exiledlanos** » Mon Mar 22, 2004 6:21 am

Yeah, I made the mistake of Buying an auto for fear of not knowing how to drive a stick, since I drove a friends 5speed mustang though, Im hooked... Cant afford a new car, Got friends that can do a tranny swap, however We all lack Daewoo parts knowledge.
My Parts list consists of

the 5 speed Tranny
The Linkage
The clutch pedal and cabling
Computer from a 5 speed lanos

I need to know what eles I need to add to this list. Im getting parts from Junkyards to save money. Anyone who has attempted this or might be able to give some advise would be helpfull. Thanks

GsiTurbo · Post by **GsiTurbo** » Mon Mar 22, 2004 1:47 pm

You should also add a flywheel, pressure plate and the clutch.

Keep in mind that an auto-to-stick conversion makes quite an advanced swap, so make sure you do know what you are doing.

Post by **Efratech** » Mon Mar 22, 2004 2:43 pm

i did the auto to manual swap when i had my 1.5 ohc...

you may also need complete CV joints/axels... since the axels are larger in the manual version

exiledlanos · Post by **exiledlanos** » Tue Mar 23, 2004 5:45 pm

Thanks for the Additions.

I found a Junk Yard thats offering me the complete conversion, tranny computer axles and all for $750 Bucks, it has 4000 miles and a year warrenty, Worth it guys?

DomWoo · Post by **DomWoo** » Tue Mar 23, 2004 9:54 pm

sound pretty good for only 4k miles wish i could do that, if they have another let me know i might be interested - no Woos in the junk yards up here, infact no Woos in this state

there is 1 other than mine in this town and all the other towns i have been to dont have any or few so im SOL when it comes to junk yard parts

daewooluvr · Post by **daewooluvr** » Wed Mar 24, 2004 6:31 pm

exiledlanos wrote:Yeah, I made the mistake of Buying an auto for fear of not knowing how to drive a stick, since I drove a friends 5speed mustang though, Im hooked... Cant afford a new car, Got friends that can do a tranny swap, however We all lack Daewoo parts knowledge.
My Parts list consists of

the 5 speed Tranny
The Linkage
The clutch pedal and cabling
Computer from a 5 speed lanos

I need to know what eles I need to add to this list. Im getting parts from Junkyards to save money. Anyone who has attempted this or might be able to give some advise would be helpfull. Thanks

Take lots of pics and document everything.

exiledlanos · Post by **exiledlanos** » Fri Mar 26, 2004 5:02 am

Pictures? Sure thing, I should be getting the cash in a few weeks, and ill get my digi cam ready.

Anyone who is interested, www.eur-asian.com

They have been great about hookin me up with there Parts,

right now hes got the Injectors and Throttle body outa a nubira, which is an easy upgrade on a 1.6L lanos.

I cant afford them though, that is if i want the tranny.

ill be sure to keep ya all posted

Mike · Post by **Mike** » Mon Apr 12, 2004 11:15 pm

exiledlanos wrote:Pictures? Sure thing, I should be getting the cash in a few weeks, and ill get my digi cam ready.

Anyone who is interested, www.eur-asian.com

They have been great about hookin me up with there Parts,

right now hes got the Injectors and Throttle body outa a nubira, which is an easy upgrade on a 1.6L lanos.

I cant afford them though, that is if i want the tranny.

ill be sure to keep ya all posted

Hey... I live only about 15 miles from that place!! You live in Colorado too?

750 bucks huh?

I'd haggler a little. Too bad not too many Daewoo's around otherwise you could haggle alot.

The original daewootech forum

01 Lanos Auto to Stick Project

01 Lanos Auto to Stick Project

Re: 01 Lanos Auto to Stick Project