woos in 1/4 mille
Moderators: daewoomofo, Moderators Group
woos in 1/4 mille
what?s up?? my name is hernando i have a daewoo nexia i wanna know what time did you guys do on the 1/4 mille with your woos, if somebody have a nexia or if somebody knows what time it can do please let me know because i?m in bogota colombia and my city is on 2600 meters over the level of the sea and any car its not on the 100% of performance in this conditions, so i wanna know how are your woos at the 1/4 mille.
please let me know the model of the car and the engine.
please let me know the model of the car and the engine.
DAEWOO NEXIA Turbo
1/4 Mille---> 12.9@2.600m OVER SEA LEVEL
OPEL POWER
-
- moron
- Posts: 4493
- Joined: Wed Dec 08, 2004 5:18 am
- Location: Knoxville, Tennessee
- Contact:
yeah its a very good time, so what kind of mods do u have in your lanos???? your lanos its 16 valve right??? do u know about nexias???
if somebody wanna change your videos of your woos with me my msn is H182@hotmail.com
if somebody wanna change your videos of your woos with me my msn is H182@hotmail.com
DAEWOO NEXIA Turbo
1/4 Mille---> 12.9@2.600m OVER SEA LEVEL
OPEL POWER
Here's a vid of my car (1.6L Lanos Sport):
http://videos.streetfire.net/player.asp ... 0D96608456
With quite a few performance mods (nothing extraordinary) I'd guess it runs somewhere in the 16's 1/4 mile.
http://videos.streetfire.net/player.asp ... 0D96608456
With quite a few performance mods (nothing extraordinary) I'd guess it runs somewhere in the 16's 1/4 mile.
-
- moron
- Posts: 4493
- Joined: Wed Dec 08, 2004 5:18 am
- Location: Knoxville, Tennessee
- Contact:
minus cams... on a NA motor, i'm putting 142hp to the wheels
10:1 compression (shaved deck)
stock internals
reinforced valve springs
mechanical tappets
teflon seals
port matched
polished
valve diameter reduction
ceramic bearings
that's just running a cai and cat-back with ported exhaust and no cats on street radials
10:1 compression (shaved deck)
stock internals
reinforced valve springs
mechanical tappets
teflon seals
port matched
polished
valve diameter reduction
ceramic bearings
that's just running a cai and cat-back with ported exhaust and no cats on street radials
-
- Super
- Posts: 246
- Joined: Sun Jun 05, 2005 11:05 pm
- Location: Odessa, Texas
- Contact:
-
- Expert
- Posts: 3772
- Joined: Wed Oct 20, 2004 4:47 am
- Location: USA, Arizona
- Contact:
You should be able to drop below 15.7 w/ those mods. My forenza has an est 125whp and weights 2855 when i ran a 16.1 on 40series cold tiresAudacityracing wrote:minus cams... on a NA motor, i'm putting 142hp to the wheels
10:1 compression (shaved deck)
stock internals
reinforced valve springs
mechanical tappets
teflon seals
port matched
polished
valve diameter reduction
ceramic bearings
that's just running a cai and cat-back with ported exhaust and no cats on street radials
www.KinkyMotorsports.com
04' Dropped Foreno
-Coil-overs, sway bars, 13" brakes, LSD, 235mm tires, the works
-Turbo in the works
01' Lanos Sport
-Undergoing 2.0 swap w/ lots of performance bits
http://www.cardomain.com/id/kinkyllama
04' Dropped Foreno
-Coil-overs, sway bars, 13" brakes, LSD, 235mm tires, the works
-Turbo in the works
01' Lanos Sport
-Undergoing 2.0 swap w/ lots of performance bits
http://www.cardomain.com/id/kinkyllama
-
- moron
- Posts: 4493
- Joined: Wed Dec 08, 2004 5:18 am
- Location: Knoxville, Tennessee
- Contact:
Intimidator
Sorry. I tried to upload one movie about Daewoo's Racer Drag machine.
But it didn't work
But it didn't work
Driving is the utmost fun you can have with your pants on!
Check out my ride: http://www.cardomain.com/ride/567267
Check out my ride: http://www.cardomain.com/ride/567267
deathwind send it to admin@daewootech.com,
and ill upload it to the server.
My best is 15.0... and is constant doing 15.1 and 15.2,
Cielo20 has a Nexia 3 door and does contant 14s, with a 2.0 16v (almost the same has i)
Efrain.
and ill upload it to the server.
My best is 15.0... and is constant doing 15.1 and 15.2,
Cielo20 has a Nexia 3 door and does contant 14s, with a 2.0 16v (almost the same has i)
Efrain.
'88 Pontiac Lemans GTE - 2.0 16v XE - fully programable ECU, Custom made intake manifold and other bits.
146.6WHP/135lb.ft - 14.81@94mph
146.6WHP/135lb.ft - 14.81@94mph
nexia182 wrote:yeah its a very good time, so what kind of mods do u have in your lanos???? your lanos its 16 valve right??? do u know about nexias???
if somebody wanna change your videos of your woos with me my msn is H182@hotmail.com
HAHAHAHAHA a good time! hihihihi i m doing 12.5 with my srt4!!!!stage 2! :twisted: haaaaaaaaaaa i love my deawoo to!
- PrecisionBoost
- Super Moderator
- Posts: 4437
- Joined: Thu Jun 19, 2003 5:59 am
- Location: Edmonton, Alberta, Canada
Travis, our friend who owns Apex Modified ran 11.07 in his SRT-4 with the engine de-tuned by nearly 40whp.isasrt4 wrote:HAHAHAHAHA a good time! hihihihi i m doing 12.5 with my srt4!!!!stage 2! :twisted: haaaaaaaaaaa i love my deawoo to!
He was trying to keep the 1/4 mile time slow enough that they wouldn't throw him off the track.....but they told him that he couldn't come back until he had a full roll cage installed anyways.
With that extra power he could have moved into the 10's with his car.
2010 BMW 335D
1994 Opel Calibra 4X4 turbo ( C20LET 2.0L Turbo )
2002 Daewoo lanos
1994 Opel Calibra 4X4 turbo ( C20LET 2.0L Turbo )
2002 Daewoo lanos