Wanted Turbo Manifold 02 Nubira 2.0L

steve_35 · Post by **steve_35** » Wed Sep 29, 2010 9:05 am

Wanted Turbo Manifold 02 Nubira 2.0L

Im located in Australia

Ill pay postage no problems form anywhere

pm me if you have one

benzino · Post by **benzino** » Wed Sep 29, 2010 11:53 am

what's a turbo intake manifold?

steve_35 · Post by **steve_35** » Wed Sep 29, 2010 11:56 am

My mistake

benzino · Post by **benzino** » Wed Sep 29, 2010 1:44 pm

I believe that this would fit
http://www.b-moto.com/product_info.php/products_id/44

benzino · Post by **benzino** » Wed Sep 29, 2010 1:51 pm

or get it custom made
or make it out of steam pipe

it's the same for any car

just take it to a good exhaust shop that deals with turbos
if you think they won't take you seriously, tell them it's a 2.0 Vectra (same engine, just different management)

Post by **PrecisionBoost** » Thu Oct 07, 2010 9:01 pm

Z20LET manifold would fit as it is the newer head like the Nubira.

Did you get the Astra VXR in australia?

steve_35 · Post by **steve_35** » Thu Oct 07, 2010 11:04 pm

Yes we do get the VXR here

Its Called HSV not VXR Astra

I checked around and the local guy wants $1350 just to make a maniflod

gse_turbo · Post by **gse_turbo** » Fri Oct 08, 2010 2:35 am

how much are you willing to spend?

steve_35 · Post by **steve_35** » Fri Oct 08, 2010 2:55 am

not that much

benzino · Post by **benzino** » Fri Oct 08, 2010 3:10 am

would the C20LET maniold fit?
http://cgi.ebay.com.au/turbo-manifold-e ... 3eff537297
http://cgi.ebay.com.au/VAUXHALL-C20XE-L ... 483b93f21f
http://cgi.ebay.com.au/C20XE-VAUXHALL-1 ... 35acecdf0a

they seem incredibly cheap

steve_35 · Post by **steve_35** » Fri Oct 08, 2010 3:13 am

They are heaps cheaper than having one made

Thanks for that ill have to get one of those i think

benzino · Post by **benzino** » Fri Oct 08, 2010 3:19 am

just wait for confirmation about fitment...

if they don't, Garrett (gse_turbo) has flanges for sale that would make it fit. He sells very high quality stuff, I have bought several brackets and I can highly recommend his work.

benzino · Post by **benzino** » Fri Oct 08, 2010 3:31 am

i just did some reading and the flange on the c20let is different

so if you have to change the flange anyway, it would be better just going for a SR20 top mount manifold
like this
http://cgi.ebay.com.au/89-94-Nissan-240 ... 5d2b6f1bab
and then swap the flange

daewooluvr · Post by **daewooluvr** » Fri Oct 08, 2010 3:47 pm

benzino wrote:i just did some reading and the flange on the c20let is different

so if you have to change the flange anyway, it would be better just going for a SR20 top mount manifold
like this
http://cgi.ebay.com.au/89-94-Nissan-240 ... 5d2b6f1bab
and then swap the flange

Agreed, this was my plan when I was looking into turbo

gse_turbo · Post by **gse_turbo** » Fri Oct 08, 2010 6:50 pm

the port hole line up and they usually put the turbo right where it needs to be. you just have to cut the flange off and weld a new one on.

The original daewootech forum

Wanted Turbo Manifold 02 Nubira 2.0L

Wanted Turbo Manifold 02 Nubira 2.0L

Re: Wanted Turbo Intake Manifold 02 Nubira 2.0L

Re: Wanted Turbo Manifold 02 Nubira 2.0L

Re: Wanted Turbo Manifold 02 Nubira 2.0L

Re: Wanted Turbo Manifold 02 Nubira 2.0L

Re: Wanted Turbo Manifold 02 Nubira 2.0L

Re: Wanted Turbo Manifold 02 Nubira 2.0L

Re: Wanted Turbo Manifold 02 Nubira 2.0L

Re: Wanted Turbo Manifold 02 Nubira 2.0L

Re: Wanted Turbo Manifold 02 Nubira 2.0L

Re: Wanted Turbo Manifold 02 Nubira 2.0L

Re: Wanted Turbo Manifold 02 Nubira 2.0L

Re: Wanted Turbo Manifold 02 Nubira 2.0L

Re: Wanted Turbo Manifold 02 Nubira 2.0L

Re: Wanted Turbo Manifold 02 Nubira 2.0L