cam shafts

blueoptra · Post by **blueoptra** » Mon Jan 24, 2005 5:57 pm

Can u put the cams on withought any other modifications?
I have a 2004 chev optra what can I expect from the install for hp torque? Also how mush for part and shipping for this item? how do I order.

Deathwind · Post by **Deathwind** » Tue Jan 25, 2005 6:18 am

First I need to know your car's engine type.
Then I'll find you a way to order our camshaft.

blueoptra · Post by **blueoptra** » Tue Jan 25, 2005 6:47 am

2L dual over head cam 16 valve d_tec

blueoptra · Post by **blueoptra** » Tue Jan 25, 2005 7:03 am

I f there is a chanse of header and down pipe I would like the cost of this too

Deathwind · Post by **Deathwind** » Thu Jan 27, 2005 11:37 pm

Well you don't have to modify the engine when installing our high cam. Becuase it's semi high-cam. Also headers+down pipe costs between 500 bucks and 650 bucks.

blueoptra · Post by **blueoptra** » Fri Jan 28, 2005 2:54 am

but how much are the cams + shipping and how do I order the cams?

blueoptra · Post by **blueoptra** » Mon Jan 31, 2005 5:37 am

blueoptra wrote:but how much are the cams + shipping and how do I order the cams?

But how mush are the cams + shiping and how do I order the cams?

Deathwind · Post by **Deathwind** » Mon Jan 31, 2005 8:50 am

I asked intimidator. But they have not given answers. So wait please

blueoptra · Post by **blueoptra** » Mon Jan 31, 2005 3:37 pm

thanks

Deathwind · Post by **Deathwind** » Mon Jan 31, 2005 6:15 pm

The cam it self costs about 1130 US dollars.
And we are finding a way to ship the product.

blueoptra · Post by **blueoptra** » Mon Jan 31, 2005 6:30 pm

do they have the hp and torque gains specs

Deathwind · Post by **Deathwind** » Tue Feb 01, 2005 11:31 am

[img]http://www.intimidator.co.kr/bbs/data/s ... 하이캠다이노.jpg[/img]

This is a dyno graph of engine after installing the high cam.

It has gain about 10 bhp and some torques[/code]

damian007vk · Post by **damian007vk** » Tue Feb 01, 2005 2:07 pm

man u are crazy if yyou are going to pay over $1100 for cams man. Especially for a daewoo/chevy. Fuck that. spend 300 bucks and spray a healthy dose of 55 HP shot of nitrous....I fifth the cost, 6 times more horses. ALso, factor in the labor of changing out the cams...and it is not efficient to change one engine component, and then the other, and then the other,. because the labor to dissassemble the engine each time will be insane, unless you are doing all the work yourself. In that case, you would also already wanna shave your head, pistons, rods, 3 angle valve job, etc...and there you are looking at about another 3,000 in parts, plus labor,,,,,,crazy

Deathwind · Post by **Deathwind** » Tue Feb 01, 2005 4:53 pm

I understand what you mean but you don't have to use word like "fuck".
Don't you think? We are not cheating or something. It's just that in Korea most of highcam' prices are placed at that rate. Alright?

Brian5475E · Post by **Brian5475E** » Tue Feb 01, 2005 11:26 pm

Dude that price sucks ass. Don't let these people screw you. go to this site and call them. our engine is not listed but they do cams for it. it's like 400 or 500 to redo the cams with more than 10hp gain. sounds like intimidator is trying to scam on this web forum. stuff in korea is made a hell of alot less than in the U.S. so why the high prices?

The original daewootech forum

cam shafts

cam shafts

Hmm.

Hum

Intimidator

Intimidator

Well

dude dont do it

Intimidator