Lanos/Aveo 1.6L UD Pulley *Group Buy*

daewooluvr · Post by **daewooluvr** » Thu Mar 31, 2005 5:12 am

Sorry I missed this post. I'm definately in.

greenbluewoo · Post by **greenbluewoo** » Thu Mar 31, 2005 5:12 am

i just pm him the information i cant wait too see the dyno results

GsiTurbo · Post by **GsiTurbo** » Thu Mar 31, 2005 6:28 am

This is great! Thanks guys.

I will send email tommorow to everyone with all the details.

Tom

AcingTeam · Post by **AcingTeam** » Thu Mar 31, 2005 2:21 pm

Awesome!! 6 people, who would've known? lol

SuperDuperDaewoo · Post by **SuperDuperDaewoo** » Thu Mar 31, 2005 8:05 pm

I am confused about how this works. I give you my info, you make 1 UD pulley, test it on the Lanos, then show us the results. If the results are not significant to manufacture, we are no longer obligated to pay. Or do we still have to pay for something that might only give us 5 HP? Thank you for the prompt response.

GsiTurbo · Post by **GsiTurbo** » Fri Apr 01, 2005 12:42 am

SuperDuperDaewoo wrote:I am confused about how this works. I give you my info, you make 1 UD pulley, test it on the Lanos, then show us the results. If the results are not significant to manufacture, we are no longer obligated to pay. Or do we still have to pay for something that might only give us 5 HP? Thank you for the prompt response.

The company we work with agrees to go ahead with the production, if we can guarantee a purchase. The only option for us to back-up, are poor results from the part. Thats why we can make one pulley initially to determine the gains, and corrections, if required.

This way, we do not have to send your money back and forth in case the pulley does not perform as expected, and you are not obligated to pay if pulley does not work. The usual gains for this size of the engine should be around 4-8 bhp or better.

Hope this explains.

Tom

eljunito · Post by **eljunito** » Fri Apr 01, 2005 3:18 am

Making the pulley initially is good so we can all be sure it will work. I'm interested but I will like to see it first.

I read in other forums, that this will give 10-20 hp. Is this possible?

I sent you a PM and reply to various posts, but got no answer from you.

GsiTurbo · Post by **GsiTurbo** » Fri Apr 01, 2005 3:59 am

Time for some comparisons... below, on the pictures, is the factory pulley off 1.6 DOHC Aveo. I need Lanos 1.6 DOHC owners to compare this to your pulley.

The pulley's diameter is approx 14 cm...

The serpentine belt ribs

The backside

All people who confirmed their interest in the pulley, will be sent email confirmation within an hour from now.

Tom

lanos2001 · Post by **lanos2001** » Fri Apr 01, 2005 5:17 am

well i looked and touched the serpentine belt and it left five lines on my finger so apparently it is ribbed. sorry about not coming through on the pics though man been really busy.

nick

GsiTurbo · Post by **GsiTurbo** » Fri Apr 01, 2005 5:21 am

We have just sent email to:

greenbluewoo
kopikao
Brian5475E
AcingTeam
Lanos 2001
eljunito
daewooluvr

EDIT: add daewooluvr
If there is someone we missed, or did not receive email, please contact us.

Tom

AcingTeam · Post by **AcingTeam** » Fri Apr 01, 2005 1:03 pm

360 Dynamics wrote:We have just sent email to:

greenbluewoo
kopikao
Brian5475E
AcingTeam
Lanos 2001
eljunito

If there is someone we missed, or did not receive email, please contact us.

Tom

Wasn't Daewooluvr in?

daewooluvr · Post by **daewooluvr** » Fri Apr 01, 2005 5:58 pm

360 Dynamics wrote:Time for some comparisons... below, on the pictures, is the factory pulley off 1.6 DOHC Aveo. I need Lanos 1.6 DOHC owners to compare this to your pulley.

The pulley's diameter is approx 14 cm...

The serpentine belt ribs

The backside

All people who confirmed their interest in the pulley, will be sent email confirmation within an hour from now.

Tom

I'll take some pics of the 1.6 DOHC Lanos pully sometime this weekend.
One thing I see missing is the Cam Gear for the Cam Positioning Sensor.

GsiTurbo · Post by **GsiTurbo** » Fri Apr 01, 2005 11:57 pm

I'll take some pics of the 1.6 DOHC Lanos pully sometime this weekend.
One thing I see missing is the Cam Gear for the Cam Positioning Sensor.

Interesting, as I study very carefully the manuals for the Lanos, and it shows no sensors whatsoever around the crank pulley. You are not confusing that with the cam sensor?

Tom

daewooluvr · Post by **daewooluvr** » Sat Apr 02, 2005 3:39 am

360 Dynamics wrote:
I'll take some pics of the 1.6 DOHC Lanos pully sometime this weekend.
One thing I see missing is the Cam Gear for the Cam Positioning Sensor.
Interesting, as I study very carefully the manuals for the Lanos, and it shows no sensors whatsoever around the crank pulley. You are not confusing that with the cam sensor?

Tom

Yes I am sure. I just replaced it on Monday. It operates off a gear looking part of the pully. I'll try to get pics to show you.

DomWoo · Post by **DomWoo** » Sat Apr 02, 2005 3:50 am

i comfirm this.

if the crank sensor gear is not on there it will not run...

that pulley needs a vbelt part too

The original daewootech forum

Lanos/Aveo 1.6L UD Pulley Group Buy