have you thought about it?!

FaWEeToO · Post by **FaWEeToO** » Mon May 16, 2005 4:07 pm

i just cant keep it off of my mind man

tell me what do u think guys, could it be done, would it look nice on a lanos?

im talking about the shifter not the whole interior :P

lanos2001 · Post by **lanos2001** » Mon May 16, 2005 4:16 pm

hey that looks promising.

that way you can have a shorshifter and if your hesitant about the reverse then you know which one your in. i never thought about that before.

nick

AcingTeam · Post by **AcingTeam** » Mon May 16, 2005 4:21 pm

It wouldn't be possible, because if you take the reverse mechanism out, there's still hard plastic left on the shaft. So, it's not just a round metal pole, it's a squarish hard plastic that is around 1 inch thick.

Maybe there's a way to remove it, or make a custom shifter...

AcingTeam · Post by **AcingTeam** » Mon May 16, 2005 4:23 pm

This is what I was talking about:

The bottom shifter, you see a white plastic block sticking out under the boot, well it goes all the way to the shift knob. Also, our metal pole is much thicker than that one of Ferrarri's.

FaWEeToO · Post by **FaWEeToO** » Mon May 16, 2005 4:27 pm

custom custom custom....

thats what im talking about guys!!!
day dreaming of it is just killing me

come on tallinted guys, i can see it coming

if there is a group buy, im the first!!!

FaWEeToO · Post by **FaWEeToO** » Mon May 16, 2005 4:32 pm

AcingTeam wrote: The bottom shifter, you see a white plastic block sticking out under the boot, well it goes all the way to the shift knob. Also, our metal pole is much thicker than that one of Ferrarri's.

take a close look at the ferrari's. it has the same block under the metal plate.

dont give up guys, it could be done!! just believe in it!!!

im going crazy

python235 · Post by **python235** » Mon May 16, 2005 6:55 pm

crazy enough i thought of it before!
still like the idea but never took it seriously .
i think it can be possible!!
but for some reason i dont know if it would look good!!
you can make it out of fiber glass AFTER YOU CUT THE SHIFTER!!
and take measurments, chrome it up or just paint it metallic silver!
and slap it on with no box!
just an idea!

FaWEeToO · Post by **FaWEeToO** » Tue May 17, 2005 6:10 pm

you can make it out of fiber glass AFTER YOU CUT THE SHIFTER!!
and take measurments, chrome it up or just paint it metallic silver!
and slap it on with no box!

no man, if im doing something im gonna do it right, i`ll just use a light weight metal plate and look for a shaft in a junk yard.

i think the fiber glass will break easly.

first thing to do is to find away of measuring the shaft movment, any ideas?

once i CREATE one, i might think of selling some :P

any one on the waiting list? :P

money · Post by **money** » Tue May 17, 2005 6:14 pm

You can experiment with a jigsaw and something cheap like plywood first, may save a few headaches in design. Like start with some construction paper (for rigidity) then cut it with an exacto until it's close, cut it outa wood until it's dialed in all the way - you have a pattern

.

money · Post by **money** » Tue May 17, 2005 6:15 pm

python235 wrote:crazy enough i thought of it before!
still like the idea but never took it seriously .
i think it can be possible!!
but for some reason i dont know if it would look good!!
you can make it out of fiber glass AFTER YOU CUT THE SHIFTER!!
and take measurments, chrome it up or just paint it metallic silver!
and slap it on with no box!
just an idea!

I don't know how your shifters sit in the console but would you have to build up any to miss that block?

pehN · Post by **pehN** » Wed May 18, 2005 10:32 pm

This looks also cool!

The original daewootech forum

have you thought about it?!

have you thought about it?!

think it can be done

Re: think it can be done