Lite weight crank pully... is it worth it?

Zikas · Post by **Zikas** » Mon Feb 20, 2006 8:03 am

karim wrote:Wow that very good I make like 15KM per litter so u make better than me

Zikas wrote:guys after swaping the pulley with a lighter one the feedback came to be very good the response time is better the top speed per shift was incresed and the top speed was some thing like 230 or somthing coz my speedo is 220 so it was going to break the needle so i backed off but after all it is better and also the fuel consumption was better i made 380 Kilos with 22 Liters of 92 octane fuel and this is gr8

and for the flywheel i hope it fits coz i think it will so next time me and MMAMDOUH will meet we will test it ISA

i got the 230 on around 5.9 RPM and this is very nice for me

Stefan · Post by **Stefan** » Tue Feb 21, 2006 11:51 am

MMamdouh wrote:indeed we tried a fly wheel from a 1.5 as it was miles liter than the 2.0 one but the bolt pattern didn't match... i don't know if that was the case or we just compared them wrongly but the weight difference is very tempting.

MMamdouh

Try one from a 2L 8v if you can find one, they are lighter than the X20XE one and have the same number of bolts and PCD.

Stef

mister_g · Post by **mister_g** » Tue Feb 21, 2006 5:30 pm

The best way to gain some power on wheels is to:

1. remove power steering, and make it electrical power steering pump (from astra g, etc).
2. remove a/c compressor
3. Install piggyback that will turn off alternator when accelarating hardly...

This 3 thing can bring you up to 20HP on wheels... And the frist two will make your car fill more driveable...

kinkyllama · Post by **kinkyllama** » Fri Apr 21, 2006 5:04 am

Where did you find this crank pulley for the vectra anyways? I tried ebay, car-parts.com, and google. Didnt find anything

kinkyllama · Post by **kinkyllama** » Sat Apr 22, 2006 9:01 pm

kinkyllama wrote:Where did you find this crank pulley for the vectra anyways? I tried ebay, car-parts.com, and google. Didnt find anything

bump

karim · Post by **karim** » Sun Apr 23, 2006 12:50 pm

We have it back here in Egypt.
Try UK.

kinkyllama wrote:
kinkyllama wrote:Where did you find this crank pulley for the vectra anyways? I tried ebay, car-parts.com, and google. Didnt find anything
bump

MMamdouh · Post by **MMamdouh** » Mon Apr 24, 2006 9:04 pm

i got it form an Opel shop that sells used car parts... its from a '97 Vectra 2.0... opel casrs are common here but i don't think they are in the USA.

MMamdouh

kinkyllama · Post by **kinkyllama** » Wed Apr 26, 2006 1:18 am

MMamdouh wrote:i got it form an Opel shop that sells used car parts... its from a '97 Vectra 2.0... opel casrs are common here but i don't think they are in the USA.

MMamdouh

What are some websites I can search through? I even tried ebay.co.uk

MMamdouh · Post by **MMamdouh** » Wed Apr 26, 2006 11:52 am

no idea man... i went for a shop to shop search till i got it so i don't know what web sites got listings for that part.

MMamdouh

kinkyllama · Post by **kinkyllama** » Tue May 02, 2006 7:49 pm

Anyone else got any ideas? I still cant find one. . .

Post by **Efratech** » Tue May 02, 2006 8:47 pm

whats wrong with the 360 UD pulley?

kinkyllama · Post by **kinkyllama** » Tue May 02, 2006 9:01 pm

Efrain A. wrote:whats wrong with the 360 UD pulley?

Nothing.. just trying to find more parts for forenza owners.

nefary · Post by **nefary** » Tue May 02, 2006 9:38 pm

if it avaliable in egypt somebody can buy it and ship it to you as any web site as I think

MMamdouh · Post by **MMamdouh** » Wed May 03, 2006 7:13 am

Efrain A. wrote:whats wrong with the 360 UD pulley?

very much expensive

MMamdouh

MMamdouh · Post by **MMamdouh** » Wed May 03, 2006 7:15 am

nefary wrote:if it avaliable in egypt somebody can buy it and ship it to you as any web site as I think

the pully itself will cost some 78USD and shipping to USA will be arround 40USD more so thats 108USD in total.

MMamdouh

The original daewootech forum

Lite weight crank pully... is it worth it?

Re: feed back