My new project.

Audacity Racing · Post by **Audacity Racing** » Thu Mar 23, 2006 10:09 pm

what about a paint job similar to the lanos howler? it was red, and you can apply silver graphics to it, or do a black with red and silver graphics

octuning · Post by **octuning** » Sun Mar 26, 2006 6:15 pm

Hood

Engine start

The paint it's beeing the most difficult choice since i started this project. I really can't decide.

FearTheWoo · Post by **FearTheWoo** » Sun Mar 26, 2006 9:50 pm

That is one sick looking start-panel. Are each of the clear switches the ones where you have to flip up the clear casing to get to the switch itself? Cause those are hawt.

As for the paint job, I'm a big fan of red and black, something like what Audacity was talking about. With your car, I would say Black, maybe a single, wide, dark- or candy-red racing stripe, offset to the driver-side a bit. Combine this with the darkened wheels w/ polished rims, and polish the bars you have on the grille and hood, and that'll be one sweet ride (woo?).

Geoffrey

daewoomofo · Post by **daewoomofo** » Mon Mar 27, 2006 4:44 am

yeah that isa woo, with ALOT of good custom work!

octuning · Post by **octuning** » Mon Mar 27, 2006 8:22 pm

FearTheWoo wrote:That is one sick looking start-panel. Are each of the clear switches the ones where you have to flip up the clear casing to get to the switch itself? Cause those are hawt.

As for the paint job, I'm a big fan of red and black, something like what Audacity was talking about. With your car, I would say Black, maybe a single, wide, dark- or candy-red racing stripe, offset to the driver-side a bit. Combine this with the darkened wheels w/ polished rims, and polish the bars you have on the grille and hood, and that'll be one sweet ride (woo?).

Geoffrey

Yes, the switchs are like that, and when they're on they also have a white led inside. As for the painting, i'm afraid that black would be to "not apealing".

octuning · Post by **octuning** » Sun Apr 02, 2006 6:02 pm

BAD LUCK! The new tailights have a big problem, they're rusting from the inside. And i don't know if we'll be able to do anything. Tomorrow we'll see...

daewoomofo · Post by **daewoomofo** » Sun Apr 02, 2006 9:45 pm

that sucks

octuning · Post by **octuning** » Wed Apr 05, 2006 1:37 pm

The tailights are off. I' ll have to stay whit the original, i'll just paint them black.

octuning · Post by **octuning** » Mon Apr 10, 2006 7:56 pm

These pics don't show much difference from the others i posted before, they are only better.

Engine ( with the correct amount of dust )

Front

17" wheel

Aneab · Post by **Aneab** » Mon Apr 10, 2006 9:41 pm

Your car impresses me more with each and every picture you post... =)

pavlozky · Post by **pavlozky** » Tue Apr 11, 2006 7:12 pm

did you get to finished the car? I'm anxious about it.

octuning · Post by **octuning** » Tue Apr 11, 2006 9:14 pm

pavlozky wrote:did you get to finished the car? I'm anxious about it.

It will go to the paint shop (i hope) next week. In a month it should be completely finished (by now, he, he, he...)

octuning · Post by **octuning** » Tue Apr 11, 2006 9:16 pm

This is my new subwoofer box. Before i almost didn't have any sound in this car, now i'll have 2x12"subwoffer, 2 amplifiers and 6 speakers. I estimate a big BANG...

kroz123 · Post by **kroz123** » Tue Apr 11, 2006 11:02 pm

it looks like you used plywood instead of MDF, looks good though

octuning · Post by **octuning** » Wed Apr 12, 2006 10:34 am

That's correct. Cause here in the islands we have to much humidity, the MDF don't get to well.