FS 1.6L Engines (stock engine, Show Engine, Bare Block) pics

daewooluvr · Post by **daewooluvr** » Fri Apr 21, 2006 11:19 am

Contemplating selling my 1.6L engines.

One is completely dressed up and ready for show. Block is completely painted, head is ceramic coated, manifold is ceramic coated. TONS of powdercoated parts. 33K miles

Another is completely stock and untouched. 46K miles

Another is just a block with internals. Block broke near starter ring. Spun bearing or wrist pin is loose. only 10K miles on it!!

Let me know if you would be interested in any of these and make an offer.

JohnnyC · Post by **JohnnyC** » Fri Apr 21, 2006 4:26 pm

I'm interested, but not able to make an offer quite yet. I'm thinking I would be interested in the stock untouched one.

Not even sure what to offer for something like that to be honest, but still can't offer anything right away.

Actually... on second thought... I think I will pass on that. I think if I want another engine I'll want to buy a 2.0 or something bigger then the 1.6 to replace my engine with, rather than going with another 1.6 ...

Sorry bout that hehe.

daewooluvr · Post by **daewooluvr** » Fri Apr 21, 2006 8:03 pm

Market value for engines with such low mileage are in the $500-$800 range
of course I'd want a bit more for the show-quality one. I'll get some pics of it. It's really good looking.

The stock engine will come with my babyblue and silver powdercoated valve cover if you want it.

The block w/ internals I'll let go for cheap. Make offer.

The show-quality one is good to go right now and the stock one would be ready to go in a few months (after I get a daily driver).

Slammed · Post by **Slammed** » Sat Apr 22, 2006 12:11 am

I am interested in the show motor what year is it ?

would like to see pics and last ? is what year is it

oh is there a time frame on the sale of the dress up motor?

daewooluvr · Post by **daewooluvr** » Sat Apr 22, 2006 4:13 pm

Slammed wrote:I am interested in the show motor what year is it ?

would like to see pics and last ? is what year is it

oh is there a time frame on the sale of the dress up motor?

the show motor is from a 2000 Automatic Lanos. It has 33K miles on it and is sitting in my storage bin.

It is ready anytime you are.

daewoomofo · Post by **daewoomofo** » Sun Apr 23, 2006 4:36 am

did you take tony cliftons car apart?

daewooluvr · Post by **daewooluvr** » Mon Apr 24, 2006 3:50 am

daewoomofo wrote:did you take tony cliftons car apart?

haha yeah that dirty bastard! haha

Nah I had these engines sitting around. I don't have a garage anymore so I could like to get them out of storage.
The stock one is currently in the car which I wanna replace with a 2.0 at some point. So that will need to wait until I get a daily driver first.

Audacity Racing · Post by **Audacity Racing** » Mon Apr 24, 2006 3:53 am

you don't have just a head and intake manifold do you?

daewooluvr · Post by **daewooluvr** » Tue Apr 25, 2006 2:16 am

Some pics of the show motor:

This valve cover is not included with this motor. See below for the new valve cover.

Front of the block without the exhaust manifold

Rear of the block without the intake manifold

Side view. You can see the cylinder head ceramic coating.

Other side view. You can see the powdercoated pullies, motor mount, and tranny mount.

Front of the block with the exhaust manifold installed.

Underneath you can see the crank pully, AC pully and bracket and tranny mount powdercoated.

Silver metalic Powdercoated intake manifold

Assorted brackets in Shimmering Candy Blue Powdercoat (not all are on the motor)

Valve cover in white and Shimmering Candy Blue Powdercoat

Ceramic Coated exhaust manifold (ported and polished)

As you can see ALOT of work went into this motor. Last thing I wanted to do to it was powdercoat the oil pan but I never got around to getting that done.

Serious offers only please.

daewooluvr · Post by **daewooluvr** » Mon May 01, 2006 3:33 pm

BUMP... someone has to want a engine...

Slammed · Post by **Slammed** » Tue May 02, 2006 1:42 am

Of course !! LOL just need the money to buy it :O( I am trying though so when and if and if you still have it I will post

daewooluvr · Post by **daewooluvr** » Tue May 02, 2006 1:10 pm

Audacityracing wrote:you don't have just a head and intake manifold do you?

I have another intake manifold sitting in my room.

I have no extra cylinder heads.

daewooluvr · Post by **daewooluvr** » Tue May 02, 2006 2:06 pm

If someone seriously wants the show engine I can give them the deal of a lifetime if they buy it right now. I found a sweat deal but need the cash asap. This offer ends 5/12.

Audacity Racing · Post by **Audacity Racing** » Wed May 03, 2006 1:55 am

pm me your price

daewooluvr · Post by **daewooluvr** » Sat May 06, 2006 3:10 pm

Well I would be asking $700 until the end of this weekend 05/07/2006.

After that I'm in no hurry to sell it and I'll be asking $1000 for the show engine.