Hello,
Working on a turbo project for the woo and I have not been able to source the size of the stock injectors. Does anybody have this information? This is a 1.6 DOHC motor. Looking to run the AFC hack for fuel mgmt and I need to know what size injectors I am stepping up from. I'd rather not take these stockers off to get flow tested seeing as I will not be using them. I'm guessing they are around 200cc. Anybody have an exact number?
Injector Size
Moderators: daewoomofo, Moderators Group
Don't have a goal, I'm just going to see what it can do with timing being the limiting factor. For the AFC hack to work well, you need injectors that are about 80% larger than stock to put the AFC in the proper negative ranges to provide a cushion for boost to be hidden from the ECU.
The Lanos puts out what...about 90whp in stock form? If that's the case I think this should be able to push ~140whp on my turbo (kkk-ko3s from an audi) at about 8psi.
The Lanos puts out what...about 90whp in stock form? If that's the case I think this should be able to push ~140whp on my turbo (kkk-ko3s from an audi) at about 8psi.
Re: Injector Size
You can use injectors from 2.0 DOHC Nubira/Leganza (same shape but more efficient) Second option is using injectors from Opel engine C20XE (150 hp) or C20LET (204hp turbo)pollito wrote:Hello,
Working on a turbo project for the woo and I have not been able to source the size of the stock injectors. Does anybody have this information? This is a 1.6 DOHC motor. Looking to run the AFC hack for fuel mgmt and I need to know what size injectors I am stepping up from. I'd rather not take these stockers off to get flow tested seeing as I will not be using them. I'm guessing they are around 200cc. Anybody have an exact number?