Need: Manual Shift Assembly

BosnianLanos · Post by **BosnianLanos** » Fri May 26, 2006 8:36 pm

I need a Daewoo manual shift assembly. I believe that one from the Lanos, Nubira, or Leganza will work. I don't care what condition it is in as long as the bottom where it clips to the linkage is intact and strong. I'm planning on doing something original with it, not a short shifter, but you'll see. I'm neck-deep in a full interior overhaul because I got sick of having to look at super-low quality injection-molded plastic in my interior with a car that looks so nice from the outside. I'm almost up to the paint stage, and I'll give pics when I'm done.

Basically, I just need that shifter, I could use my own, but it would be convenient to be able to drive the car while my interior is out getting painted.

PLEASE!!!

Thanks!

lanos2001 · Post by **lanos2001** » Fri May 26, 2006 8:43 pm

well i don't have one but i'm pretty sure the shifter from a 94 cavalier is the exact same. at least i know you can use the B&M short shifter from them so i'm guessing it should work. just a thought.

nick

BosnianLanos · Post by **BosnianLanos** » Sat May 27, 2006 3:48 am

No, I looked at the '94 Cavalier shifters a few weeks back and while they look 90% identical, it is the bottom that connects to the linkage that is different, and therefore unuseable. Also, when shortening the Cavalier shifter, they are only able to remove about 1 inch, which is almost nothing. And like I said, I don't need it to make a short shifter...

daewoomofo · Post by **daewoomofo** » Sat May 27, 2006 12:27 pm

just drive your other lanos, i know it sucks to drive it when you have a sport sitting there you you cant forget about your sedan, it needs to feel loved too!