Zikas wrote:hello guys
i just installed an oil cooler and things were amazingly good
but i have a problem with the oil pan it need a new gaskit
next POST will have some pics of the whole setup and the dyno charts as well
we started a new nubira 1.6 turbo project and i think it will be very nice to have the first nubira 1.6 turbo out from the same team
i think we'll open our turbo/tunning/performance shop soon
The First 2.0 Nubira Turbo In Egypt ***update***
Moderators: daewoomofo, Moderators Group
Cool and good luck
Some Pictures for the oil cooler and the intercooler and the turbo itself (but not that good)
Oil cooler
oil cooler and intercooler
turbo... installed right under the OEM header
side shot for the turbo
exhaust outlet
IMG]http://i83.photobucket.com/albums/j319/ ... SC0028.jpg[/IMG]
car's front
MMamdouh
Oil cooler
oil cooler and intercooler
turbo... installed right under the OEM header
side shot for the turbo
exhaust outlet
IMG]http://i83.photobucket.com/albums/j319/ ... SC0028.jpg[/IMG]
car's front
MMamdouh
Zikas The Great (Nubira)
-
- Moderator
- Posts: 4795
- Joined: Fri Nov 18, 2005 1:41 am
- Location: 313
yeah that looks nasty but it is basicly due to the 90 degree bent outlets on the intercooler, had to put it so much to the front to make room for the piping to go arround the A/C serpantine.lanos2001 wrote:nice work. and the intercooler kinda looks like a mustache for the woo. lol.
nick
we are considering custom making and inlet and outlet with ports facing the sides - rather than backwars - so we can move the IC back to where it is supposed to be.
MMamdouh
Driving is the utmost fun you can have with your pants on!
Check out my ride: http://www.cardomain.com/ride/567267
Check out my ride: http://www.cardomain.com/ride/567267
i got to say that we inspired that idea from you Tim and it is working greatubuyau wrote:Hooray for low mount turbos on stock exhaust manifolds!
I think this is the way forward for Daewoo tuners
another daewootech member - nubi owner - is going to join the "boost" club soon... stay tunedWho else will join us ??
MMamdouh
Driving is the utmost fun you can have with your pants on!
Check out my ride: http://www.cardomain.com/ride/567267
Check out my ride: http://www.cardomain.com/ride/567267
got good feedback about SAFC II... and it is available on ebay as well as high flow injectors.
MMamdouh
MMamdouh
Driving is the utmost fun you can have with your pants on!
Check out my ride: http://www.cardomain.com/ride/567267
Check out my ride: http://www.cardomain.com/ride/567267
not sure about the units here but it seems all the ratings are US units so most probably it will be in the same units the americans use for torque rating.
MMamdouh
MMamdouh
Driving is the utmost fun you can have with your pants on!
Check out my ride: http://www.cardomain.com/ride/567267
Check out my ride: http://www.cardomain.com/ride/567267
watch out with the SAFC-II on ebay. i've read an article from either them or Apexi about people making fake ones and selling them on ebay. they're near identical and work to a point. i don't remember which one it was but i know that on their official website there is a warning about it. it tells you how you can make sure the item you are buying is theirs or not. like i said i don't remember which of the two it was but just a warning.
nick
nick
save a tree, eat a beaver.