The First 2.0 Nubira Turbo In Egypt ***update***

MMamdouh · Post by **MMamdouh** » Thu Aug 10, 2006 12:18 pm

so far no... after a failed attempt for installation due to a broken water line we didn't try it again... we are trying to figure out a way arround the big @$$ exhaust housing that is not clearing the A/C compressor.

we are either going to use the exhaust housing from the old turbo - it was smaller than this one - or we will try Debo's setup where the exhaust housing is facing the battry side... still in the works basicly.

MMamdouh

Nubira2.2 · Post by **Nubira2.2** » Thu Aug 10, 2006 8:38 pm

get a turbo manifold

MMamdouh · Post by **MMamdouh** » Thu Aug 10, 2006 11:14 pm

good idea but $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$

going custom is not an option in this country either.

MMamdouh

exist3nce · Post by **exist3nce** » Fri Aug 11, 2006 5:54 pm

MMamdouh wrote:good idea but $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$

going custom is not an option in this country either.

MMamdouh

its not an option because of cost or there is no one at all who makes that stuff?

Zikas · Post by **Zikas** » Fri Aug 11, 2006 8:57 pm

it is not an option here to make a nice clean one
and for your info i tried to use the old exchust turbine but it didn't work as good as it must be so i will try to make some mods to the one i have and hope that thigs goes fine

am planning to work on this tomorrow as ah have some extra free time
wish me luck guys

Nubira2.2 · Post by **Nubira2.2** » Fri Aug 11, 2006 8:57 pm

OMG

no fuel management

i though i was crazy bc i wil use a FMU a bigger fuel pump

i think the RC injectors will worck fine

using a e-manage or SMT6-7

MMamdouh · Post by **MMamdouh** » Fri Aug 11, 2006 11:32 pm

we have a SAFC to test and searching for a good deal on SMT6.

MMamdouh

MMamdouh · Post by **MMamdouh** » Fri Aug 11, 2006 11:35 pm

exist3nce wrote:
MMamdouh wrote:good idea but $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$

going custom is not an option in this country either.

MMamdouh
its not an option because of cost or there is no one at all who makes that stuff?

both... buying one will cost too much specially that it is very heavy to ship and if we went custom it will end up to be a peice of crap due to the lack of skilled welding shops here.

MMamdouh

Nubira2.2 · Post by **Nubira2.2** » Sat Aug 12, 2006 3:51 am

what if you gave the money to one of us buy it and send it to you ?

Zikas · Post by **Zikas** » Sat Aug 12, 2006 12:35 pm

hello all
today i tried to install the turbo but again it didn't fit coz of the A/C compressor so i think i will try to fix the old one and install it
and again if any of u guys know where to my a cheap SMT6 please let me know

MMamdouh · Post by **MMamdouh** » Sat Aug 12, 2006 9:57 pm

Nubira2.2 wrote:what if you gave the money to one of us buy it and send it to you ?

that will be great but how much is it going to cost for shipping it??

i tried to sell my CAT bypass pipe to Audacityracing and the shipping was some 40USD for a 1.75Kgm pipe... i am sure the header will weight way more than this so the shipping cost will be sky high.

anyways lets not jump into conclusions... tell me how much it will cost me to buy a T3/T4 turbo mani for the T20SED and ship it all the way to Cairo, Egypt.

i really appreciate your help man.

MMamdouh

Nubira2.2 · Post by **Nubira2.2** » Sun Aug 13, 2006 12:14 am

give me some info on the pm and ill chek out ok ?

pontiacjeff · Post by **pontiacjeff** » Mon Aug 28, 2006 5:20 pm

MMamdouh wrote:
Nubira2.2 wrote:what if you gave the money to one of us buy it and send it to you ?
that will be great but how much is it going to cost for shipping it??

i tried to sell my CAT bypass pipe to Audacityracing and the shipping was some 40USD for a 1.75Kgm pipe... i am sure the header will weight way more than this so the shipping cost will be sky high.

anyways lets not jump into conclusions... tell me how much it will cost me to buy a T3/T4 turbo mani for the T20SED and ship it all the way to Cairo, Egypt.

i really appreciate your help man.

MMamdouh

http://www.mvaux.com/

click on Astra/Kadett

...and from that page:

X20XEV (2.0L Ecotec) turbo kit

-Turbo Iron cast X20XEV manifold £130

Zikas · Post by **Zikas** » Thu Oct 12, 2006 9:05 am

Dear all as am very sorry to tell u this but still am very happy to say it

i sold my great Nubira (2.0 Turbo) and i got a Bimmer (E34 )that i will be turboing very soon wish me luck and keep me postit

MMamdouh · Post by **MMamdouh** » Thu Oct 12, 2006 12:50 pm

it is a good and bad news at the same time.

first off i'd like to say congrats on the new ride and this is the ggod news indeed

... keep it in the safe range as it is wild as hell.

the bad news is that the beast won't see anymore developments and future projects since you sold it

also i can say that the good news is the car is still within the daewootech community as the guy who bought it is Yasser - the guy that had the auto 1.6 nubira and turbo plans - so in part we got to see and ride the car even though it changed hands.

the only problem is that the wootech community here is growing a tendance to buy BMWs... zikas got the E34 M5 and Bezo got an M40, Elhamy wanna get an M40 as well and i have always dreamed of owning a bimmer so.... i might get one if i managed to rais the finance.

here is a clip for zika's new ride in action at the local autocross champioship:
http://www.megaupload.com/?d=KW8CVI4Q

MMamdouh

The original daewootech forum

The First 2.0 Nubira Turbo In Egypt update

ByeBye Woo