GsiTurbo 2.0L 16V Turbo buildup ***DYNORUN 236WHP 255WTQ***

decyphex · Post by **decyphex** » Wed May 09, 2007 6:20 am

Does emanage work on anything? Maybe a sunbird N/A computer?

Post by **Efratech** » Wed May 09, 2007 2:14 pm

finally its moving !!! very happy for ya,

and yeah, solid mounts are a pita on daily drivers.

tallkid · Post by **tallkid** » Wed May 09, 2007 8:00 pm

one hell of a buildup. i bet she'll be very quick when you let loose on her. can't wait for a vid

Nubira2.2 · Post by **Nubira2.2** » Wed May 09, 2007 8:08 pm

great News Tom

i have that same BOV i changed the outlet of the BOV to a Blitz older version BOV and it sounds louder
but the dual drive wont work and u can get surge at near 0 psi ( u can solve that with you foot)

im saying this to you if you want it to sound louder

c02one · Post by **c02one** » Thu May 10, 2007 8:34 pm

what brand and where did u get ur underdrive pulley, or is it custom made.

greenbluewoo · Post by **greenbluewoo** » Fri May 11, 2007 1:35 am

I think its a 360dynamics pulley kinkyllama sells them http://cgi.ebay.com/ebaymotors/Suzuki-F ... QQtcZphoto

GsiTurbo · Post by **GsiTurbo** » Fri May 11, 2007 1:42 am

c02one wrote:what brand and where did u get ur underdrive pulley, or is it custom made.

You should drop Kinkyllama a PM, he can help you out

As an update, it is confirmed the headgasket did not seal properly for whatever reason and coolant is mixing with oil

I wont have time to replace it anytime soon, so the project is on hold untill I get back from the holidays at the end of June.

decyphex · Post by **decyphex** » Fri May 11, 2007 2:55 am

GsiTurbo wrote:
c02one wrote:what brand and where did u get ur underdrive pulley, or is it custom made.
You should drop Kinkyllama a PM, he can help you out

As an update, it is confirmed the headgasket did not seal properly for whatever reason and coolant is mixing with oil I wont have time to replace it anytime soon, so the project is on hold untill I get back from the holidays at the end of June.

That sucks....!!!! I wonder what could have caused that..

GsiTurbo · Post by **GsiTurbo** » Fri May 11, 2007 2:56 am

Could be user error during the gasket install (me), or faulty gasket

exist3nce · Post by **exist3nce** » Fri May 11, 2007 3:04 am

Oh man, that sucks bigtime. Check out my thread to see what just happened to my project

decyphex · Post by **decyphex** » Fri May 11, 2007 3:56 am

What kind of headgasket was it?

GsiTurbo · Post by **GsiTurbo** » Fri May 11, 2007 4:09 am

It was cometic... I installed 3 Cometic gaskets in total on 3 different vehicles - one failed (mine). On the other hand, Nubira 2.2 is using same gasket and he had no problems that I know of.

decyphex · Post by **decyphex** » Sat May 12, 2007 7:27 am

defect or human error..

ecotec · Post by **ecotec** » Sun May 13, 2007 2:20 am

Which is the code of arp cylinder head stud ? They work on t22sed?

GsiTurbo · Post by **GsiTurbo** » Sun May 13, 2007 2:46 am

ecotec wrote:Which is the code of arp cylinder head stud ? They work on t22sed?

ARP 209-4301 and I do see why they would not work on the T22SED

The original daewootech forum

GsiTurbo 2.0L 16V Turbo buildup DYNORUN 236WHP 255WTQ

engine buildup

Re: engine buildup

Re: engine buildup