HELP: best way to advance ignition timing

TnastyII · Post by **TnastyII** » Thu May 31, 2007 8:42 pm

should i go with the MSD DIS-2 or buy a piggyback? which one is least difficult to put on? if you say piggyback which one should i go with? all i want to do is advanced the ignition timing so if you have any other idea let me hear em. my car is a 2004 suzuki forenza 2.0
Thanks!

gse_turbo · Post by **gse_turbo** » Thu May 31, 2007 8:47 pm

what are you trying to do?

could it be done with cam timing? if so QED offers a set of adjustable cam gears for abour $250-$300

garrett

TnastyII · Post by **TnastyII** » Thu May 31, 2007 9:03 pm

i saw where u posted that info. did you buy those? u said u had to do a mod for the cam sensor. what did u do for that? im putting a water/methanol injection kit on my car...i need to advance the timing to get max results from it :]

gse_turbo · Post by **gse_turbo** » Thu May 31, 2007 10:12 pm

they offer a kit that needs no mods. i don't have a set. i'm working with AEM to create a kit state side but that may take some time.

garrett

TnastyII · Post by **TnastyII** » Thu May 31, 2007 10:14 pm

so the best way would b to order those adjustable cam gears then? how do i order them? email?

gse_turbo · Post by **gse_turbo** » Thu May 31, 2007 10:25 pm

you can order through email but i would wait and see what some of the others say. this post is only a couple minute old and i'd for you to spend that money if there is a less expensive route.

garrett

TnastyII · Post by **TnastyII** » Thu May 31, 2007 10:41 pm

i have to wait anyway cuz i dont have alot of money right now. lol. but yea i just want to find the best and somewhat cheapest way to do this.

gse_turbo · Post by **gse_turbo** » Thu May 31, 2007 10:49 pm

PM kinkyllama, i'm sure he's come across this with his forenza.

garrett

kinkyllama · Post by **kinkyllama** » Fri Jun 01, 2007 8:00 pm

TnastyII wrote:so the best way would b to order those adjustable cam gears then? how do i order them? email?

I'm just starting to look into them...no idea on time yet. Trying to get all the other products we started out first.

Post by **PrecisionBoost** » Sat Jun 02, 2007 4:15 pm

gse_turbo wrote:PM kinkyllama, i'm sure he's come across this with his forenza.

garrett

I thought you were going to bring in a few sets..... did you end up just getting one for yourself??

klonek78 · Post by **klonek78** » Sun Jun 03, 2007 8:42 pm

the easiest way to advance ignition it to put something like this http://jethro.viket.net/spark.html

it is easy to find in any LPG/CNG service for a few bucks

TnastyII · Post by **TnastyII** » Sun Jun 03, 2007 9:37 pm

sounds good! where can i get one of those things? order one from that link u posted? how many degrees can i advance using this thing? i have a 04 suzuki forenza 2.0L so which one do i order?

klonek78 · Post by **klonek78** » Sun Jun 03, 2007 9:45 pm

I don't know where you came from but in europe it is very easy to buy. almost any workshop that convert engines to be powered by LPG/CNG gas has it.

TnastyII · Post by **TnastyII** » Sun Jun 03, 2007 9:47 pm

im in the U.S. so i dont know where to get one from. could i buy one off that website and they ship it to me?

klonek78 · Post by **klonek78** » Sun Jun 03, 2007 10:05 pm

http://cgi.ebay.com/ebaymotors/MSD-Univ ... dZViewItem

http://cgi.ebay.com/ebaymotors/Jacobs-E ... dZViewItem

http://cgi.ebay.com/ebaymotors/MSD-8683 ... dZViewItem

I've searched US Ebay and found this things above. I think it is good start

I don't know those devices and you must ask sellers if they work or keep looking