Espero by Viper
Moderators: daewoomofo, Moderators Group
Espero by Viper
Hi, my name is Vedran , I am from Croatia and I drive a 97' Daewoo Espero
So here it is..
it was like this before I got my hands on it
I bought some new rims, from factory 185/65/14 I went to 215/35/18
I had to put some track spacers on the rear axle , 2cm on each side
but then it was normaly very high , it looked like a monster truck
so , I ordered Eibach springs -30mm for it, but by mistake they gave me -30mm for Nexia , and it lowered the front about 70mm and the rear about 40mm , I was very pleased
that was it for a while..
then the project started
because of the big rims, the rear brakes looked silly , so I got the rear axle from a Vectra 2.0
first I dissasembeled it..because it was rusty and didn't work ..
By ViperZG
I got rid of all the rust and painted it in mat black
By ViperZG
the callipers were repaired , fitted with new parts..
By ViperZG
old vs. new discs
By ViperZG
new discs painted in mat black
By ViperZG
all new parts fitted and assembeled
By ViperZG
old vs. new axle
By ViperZG
after a while driving and parking , I scratched a rim , so I decided to repair them and paint them
painted the inside in mat black
By ViperZG
very carefully I had to tape the rim to be painted
By ViperZG
the rims repaired and painted
By ViperZG
on the car with the new disc
By ViperZG
then it was the cars turn, so I started do take it apart
By ViperZG
By ViperZG
By ViperZG
and ready for some bodywork
By ViperZG
By ViperZG
By ViperZG
progress
all the signes are removed from the car, the frot is given a bad look , the rear is changed , rust is fixed , fenders are pulled out etc.
By ViperZG
By ViperZG
and the new rear spacers, 3cm per side
By ViperZG
By ViperZG
the front bad look
By ViperZG
By ViperZG
By ViperZG
By ViperZG
By ViperZG
and finally ready for a little trip
By ViperZG
By ViperZG
The car was then driven 100km like that
The custom front and rear bumper are being made at the moment , as well as the custom sideskirts and rear wing, I expect it to be finished and painted by the end of the week, so till the next report ...
So here it is..
it was like this before I got my hands on it
I bought some new rims, from factory 185/65/14 I went to 215/35/18
I had to put some track spacers on the rear axle , 2cm on each side
but then it was normaly very high , it looked like a monster truck
so , I ordered Eibach springs -30mm for it, but by mistake they gave me -30mm for Nexia , and it lowered the front about 70mm and the rear about 40mm , I was very pleased
that was it for a while..
then the project started
because of the big rims, the rear brakes looked silly , so I got the rear axle from a Vectra 2.0
first I dissasembeled it..because it was rusty and didn't work ..
By ViperZG
I got rid of all the rust and painted it in mat black
By ViperZG
the callipers were repaired , fitted with new parts..
By ViperZG
old vs. new discs
By ViperZG
new discs painted in mat black
By ViperZG
all new parts fitted and assembeled
By ViperZG
old vs. new axle
By ViperZG
after a while driving and parking , I scratched a rim , so I decided to repair them and paint them
painted the inside in mat black
By ViperZG
very carefully I had to tape the rim to be painted
By ViperZG
the rims repaired and painted
By ViperZG
on the car with the new disc
By ViperZG
then it was the cars turn, so I started do take it apart
By ViperZG
By ViperZG
By ViperZG
and ready for some bodywork
By ViperZG
By ViperZG
By ViperZG
progress
all the signes are removed from the car, the frot is given a bad look , the rear is changed , rust is fixed , fenders are pulled out etc.
By ViperZG
By ViperZG
and the new rear spacers, 3cm per side
By ViperZG
By ViperZG
the front bad look
By ViperZG
By ViperZG
By ViperZG
By ViperZG
By ViperZG
and finally ready for a little trip
By ViperZG
By ViperZG
The car was then driven 100km like that
The custom front and rear bumper are being made at the moment , as well as the custom sideskirts and rear wing, I expect it to be finished and painted by the end of the week, so till the next report ...
I also replied on www.gmclub.ro , but I might as well post it here also:
Welcome and congratulations on a hard and well done job!!
I am really impresed to see what amount of work you had with this car. I like it that you've done everything so clean and nicely worked.
Be sure to keep us posted on every progress you make, don't abandon this forum, ok?
Cheers!
Welcome and congratulations on a hard and well done job!!
I am really impresed to see what amount of work you had with this car. I like it that you've done everything so clean and nicely worked.
Be sure to keep us posted on every progress you make, don't abandon this forum, ok?
Cheers!
-
- Moderator
- Posts: 4795
- Joined: Fri Nov 18, 2005 1:41 am
- Location: 313
C/P from other forums..
here is a preview pic of the front bumper..
By ViperZG
Its being painted at the moment , i HOPE it will be completed by saturday 77000000.gif
hope you like it
By ViperZG
By ViperZG
By ViperZG
By ViperZG
And here are some new pics
They were taken 5 minutes after I brought it home, so please dont tell me that the parts "dont fit" because I know..they were onli put on the car for the photos, I will assemble it tommorow..
By ViperZG
By ViperZG
By ViperZG
and the exhaust
By ViperZG
By ViperZG
the diffuser will be paintet in mat black on tuesday , or wednesday, and then I will put the exhaust on drunk.gif
here is a preview pic of the front bumper..
By ViperZG
Its being painted at the moment , i HOPE it will be completed by saturday 77000000.gif
hope you like it
By ViperZG
By ViperZG
By ViperZG
By ViperZG
And here are some new pics
They were taken 5 minutes after I brought it home, so please dont tell me that the parts "dont fit" because I know..they were onli put on the car for the photos, I will assemble it tommorow..
By ViperZG
By ViperZG
By ViperZG
and the exhaust
By ViperZG
By ViperZG
the diffuser will be paintet in mat black on tuesday , or wednesday, and then I will put the exhaust on drunk.gif
-
- Posts: 4
- Joined: Thu Feb 15, 2007 11:33 pm
- Location: Cali - Colombia