What type of injector do you recommend?

Forced induction, NA tunning, exhaust, just performance

Moderators: daewoomofo, Moderators Group

Locked
User avatar
mocpac
Moderator
Posts: 3385
Joined: Sat Jun 14, 2003 9:24 pm
Location: Puerto Rico
Contact:
Contact mocpac

What type of injector do you recommend?

Post by mocpac »

Ok I just want to know, How much CC or LB 40 42 or 440cc... How much for 10psi of boost? Also a set of injectors that I can control with the Apex.
ImageImage
Top
Nubira2.2
Expert
Posts: 1325
Joined: Wed Nov 10, 2004 10:47 pm
Location: SouthWest, PR

Post by Nubira2.2 »

the injectors size go with your HP goals
piggybacks can usually can control 50% bigger than stock injectors
Image
Mitsubishi Eclipse GST 304whp 319tq @22psi w EVO 3 16G Daily Driven
DAEWOO Nubira 2.2L Turbo 217whp 204tq @13psi SOLD
Top
exist3nce
Expert
Posts: 1233
Joined: Mon Oct 25, 2004 2:24 am
Location: Toronto, Canada

Post by exist3nce »

Nubira2.2 wrote:the injectors size go with your HP goals
piggybacks can usually can control 50% bigger than stock injectors
+1

You should decide on what HP you want to generate and then work backwards from there.

This is a good link to get you started.

http://www.rceng.com/technical.htm
2004 Optra/Forenza/Lacetti - 225whp - Haltech Sprint500 - CT12B - Getrag F28 6spd - KW V3 Coilovers - FX35 Retrofit
2002 IS300 5MT - 615whp - AEM EMS - GT4088R - Built 9.5CR - R154 - TRD LSD - SupraTT T/B - Varex - LS430 Retrofit
Top
klonek78
Junior
Posts: 100
Joined: Tue Jan 24, 2006 9:46 pm

Re: What type of injector do you recommend?

Post by klonek78 »

mocpac wrote:Ok I just want to know, How much CC or LB 40 42 or 440cc... How much for 10psi of boost? Also a set of injectors that I can control with the Apex.
i have 330cc (c20let) injectors in my x20sed and over 280HP is not a problem....
DAEWOO NUBIRA II 2,0turbo (K04+2,5"exhaust tuned with SMT7) CDX WAGON 222222km so far :)
350KM@470Nm by GT28RS+N2O coming soon :D
Top
User avatar
mocpac
Moderator
Posts: 3385
Joined: Sat Jun 14, 2003 9:24 pm
Location: Puerto Rico
Contact:
Contact mocpac

Post by mocpac »

I'm not sure how much HP I want i nthe car, I just know that Iwill run upto 10psi of boos if I star the project. I see that the C20Let use some botch yellow injectors. Dont know the lb.
ImageImage
Top
Audacity Racing
moron
Posts: 4493
Joined: Wed Dec 08, 2004 5:18 am
Location: Knoxville, Tennessee
Contact:
Contact Audacity Racing

Post by Audacity Racing »

10 pounds is between 190 and 210 hp (crank)... size accordingly. If you want to get forged internals and go bigger later... size them a little large. If you're content with 200hp, size them right
Top
klonek78
Junior
Posts: 100
Joined: Tue Jan 24, 2006 9:46 pm

Post by klonek78 »

mocpac wrote:I'm not sure how much HP I want i nthe car, I just know that Iwill run upto 10psi of boos if I star the project. I see that the C20Let use some botch yellow injectors. Dont know the lb.
stock (yellow) c20let injectors are 330cc
DAEWOO NUBIRA II 2,0turbo (K04+2,5"exhaust tuned with SMT7) CDX WAGON 222222km so far :)
350KM@470Nm by GT28RS+N2O coming soon :D
Top
Locked

Return to “Aftermarket and High Performance”